Cylindrical Roller Bearings NU10xx EM Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller.EM Series, which combines the strengths and technologies of previous cage designs into a one-piece brass roller-guided cage which achieves lower temperature running and quieter operation.High strength and wear resistant cage and High load rating.

Cylindrical Roller Bearings NF Series

Single row cylindrical roller bearings NF type has a single rib on the outer ring, and two ribs on the inner ring.Can receive single direction axial loads. Much like the NJ bearing, these bearings possess some thrust load capability.

Cylindrical Roller Bearings CPM Series

Full complement cylindrical roller bearings without an outer ring have solid inner rings and rib-guided cylindrical rollers. The inner rings are produced with two rigid ribs.Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity,high rigidity and are suitable for particularly compact designs.They are are mainly used in the need to withstand large radial loads and low speed of the occasion, in the lower rotary can withstand shock loads and moment loads.

Cylindrical Roller Bearings NNU Series

NNU 49 series double row cylindrical roller bearings have three integral flanges on the outer ring and no flanges on the inner ring. It available with either a cylindrical or a 1:12 tapered bore (designation suffix K). In machine tool applications, cylindrical roller bearings with a tapered bore are preferred over bearings with a cylindrical bore, because the taper enables more accurate adjustment of clearance or preload during mounting. Bearings in the NNU 49 series, with a very low cross-sectional height, provide a higher degree of stiffness than bearings in the NN 30 series, but a somewhat lower load carrying capacity.

Cylindrical Roller Bearings N2xx & N3xx Series

The outer ring of an N type single row cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.

Cylindrical Roller Bearings NU2xx & NU3xx Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller which slides in both directions and is commonly found in motors. To meet the various needs, cages are made from three different materials:Polyamide(ECP),Steel(ECJ), Brass(ECM).

Cylindrical Roller Bearings NJ Series

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which ease of assembly and fitting and axial location.